Sola

Sola, Boutique guitar, custom guitar

Whether you rock, twang or swing your way to musical stardom, Sola is a versatile way to get there.


What a great guitar! So well executed…I felt like I could make it do what I wanted to – I just had to think about it a little more

Leigh Fuge, YouTube Review

With a comfortable, single cutaway body, 24 3/4″ scale and a simple to use six-a-side headstock and hardtail or wraparound bridge, Sola is ready for you.

Sola comes equipped with one or two custom pickups, hand wound in the UK to your specifications. The Gotoh wraparound bridge will keep things solid and in tune, while the stainless steel frets promise to never wear out.

Standard design features include a solid colour body top, top and back comfort cutaways, upper fret access bevel and an easy-access output jack.

Sola comes in three flavours:

SOLA ORIGINAL

24 3/4″ (628mm) scale

Black limba body

Maple neck, rosewood fingerboard

Single Custom Handwound P90 or Humbucker pickup

Gotoh wraparound bridge

Gotoh Locking tuners

Stainless steel frets

CTS pots

1 5/8″ (41mm) nut width

Solid top finish

£1900

SOLA STANDARD

24 3/4″ (628mm) scale

Black Limba body

Maple neck, rosewood fingerboard

Two Custom Handwound P90s or Humbuckers

Gotoh wraparound bridge or hardtail

Gotoh Locking tuners

Stainless steel frets

CTS pots

1 5/8″ (41mm) nut width

Matching control cavity cover

Solid top finish

£2100

SOLA ORIGINAL Serial no. 80001 (shown above)

  • Black limba body
  • Flame maple neck*
  • Cocobolo fingerboard*
  • 24 3/4″ scale
  • Sunbear 56 SB90 pickup
  • Gotoh 510UB bridge
  • Gotoh 381 tuners
  • Volume, tone

SOLA PLUS Serial no. 80002

  • Flame maple top*, mahogany back
  • One piece maple neck with stainless steel frets
  • Grainger hard tail bridge*, Kluson locking staggered tuners*
  • Sunbear T-Twin* (Alnico III, 11.6K) and 59 SBPAF* (alnico IV, 8.2K) pickups
  • Volume, tone, 3 way selector & push/pull for neck coil split

SOLA PLUS Serial no. 80003

  • Flame maple top*, mahogany back
  • Flame maple neck with rosewood fingerboard
  • Stainless steel frets
  • 24 3/4″ scale
  • Sunbear 59 SBPAF set – Neck – Alnico III, 7.8 k / Bridge – Alnico IV, 8.3 K
  • ABM 5200c Tremolo* and Gotoh 510* tuners

SOLA ORIGINAL Serial no. 80004

  • Black limba body
  • Flame maple neck, ebony fingerboard
  • Sunbear SB90 pickup
  • Gotoh 510UB one piece bridge

SOLA STANDARD (BARITONE) Serial no. 860005

  • Baritone, with 28″ scale
  • Black limba body
  • Maple neck, rosewood fingerboard
  • Carbon fibre reinforced neck*
  • Custom paint finish on body, headstock and control cavity cover*
  • Sunbear custom pickups (7K and 14K)
  • Grainger hard tail bridge

Sola, custom made guitar, Suffolk Luthier, UK Luthier

SOLA PLUS Serial no. 80006

  • Black limba body
  • Flame maple top
  • One piece maple neck
  • Sunbear T-Twin and SB-PAF Pickups
  • Push pull on volume and tone for coil split
  • Gotoh hard ware (hardtail bridge and locking tuners)
  • Graph Tech nut

SOLA ORIGINAL Serial no. 80006ML

  • Elm one piece body*
  • Custom Cool red burst finish with matching headstock*
  • Bird’s Eye Maple neck, reinforced with carbon fibre rods*
  • Padauk fingerboard*
  • Stainless steel frets
  • Old Bones P90 (custom wired for tap)*
  • Gotoh 510UB bridge
  • Gotoh locking tuners
  • Boost circuit, switch on push-pull tone*
  • VariTap to dial in second pickup coil*

*non-standard extras – extra costs apply

Get in touch to learn more about building your Sola.